Skip to main content
Home - Reade
Contact
Home - Reade
Build RFQ
clear
Back to All Products
 
Back to All Products
All Products Sustainable Products

Pumice Powder

Pumice, amorphous aluminum silicate, is a very light colored, frothy volcanic rock that is formed from lava full of gas. It is very light and can float on water. Pumice is amorphous and is generally inert with a neutral pH. Due to its porous nature, pumice is amazingly lightweight. However, it is easily crushed and refined without losing its utility at any grade. Pumice is a sustainable and abundant resource.
Detailed Particle Size Information

Available in 16 different granulations from very coarse granules (4.75 mm and finer) to very fine powders (45 microns and finer)
“Micro-Fine 5” (d90 of 5µm)

”Micro-Fine 10” (d90 of 10µm)

Typical Chemical Analysis

Silicon Dioxide = 76.2%
Aluminum Oxide = 13.5%
Ferric Oxide = 1.1%
Ferrous Oxide = 0.1%
Sodium Oxide = 1.6%
Potassium Oxide = 1.8%
Calcium Oxide = 0.8%
Titanium Oxide = 0.2%
Magnesium Oxide = 0.05%
Moisture = <1.0% Crystalline SiO₂ = None Detected

Typical Physical Properties

Appearance – White powder
Hardness (MOHS): 6
pH – 7.2
Radioactivity – None
Softening Point – 900 degrees C
Water Soluble Substances – 0.15%
Loss on Ignition – 5%
GE Brightness – 84
Specific Gravity – 2.4
Reactivity – Inert

Typical Applications

Pumice is widely used for the following applications.
Concrete—lightweight aggregate and sand, concrete pozzolan (SCM).
Abrasives—sand blast grit, shaped pumice scrubbing and exfoliating stones, polishing and tumbling grit.
Lightweight Aggregate—lightweight concretes, precast stone veneers, plaster sand, mortar sand, geotechnical ­fills, concrete masonry units (CMUs).
Exfoliants—cosmetics, hand cleaners.
Filtration—Water treatment ­filtration media, engineered bio­tration soils.
Horticultural—soil amendment, soilless grow media, compost amender.
Texturizing Grit—in-suspension grit for primers, paints, and industrial coatings.
Livestock and Pets—dust bathing, chew stones, shaped grooming stones, con­ned-space moisture control. Functional
Filler—non-crystalline silica (micronized) for paints, coatings, rubber compounds.

Packaging Options

1 to 55 lb [0.45 to 25 kg] bags, boxes, pails, jars—depending on grade
Up to 2200 lb [998 kg] super sacks (palleted)
Bulk shipped in rail car or tractor-trailer

Sustainable Qualities

Pumice Powder is a sustainable and bio-based material that is ideal for a variety of applications. Pumice is a naturally occurring volcanic rock formed when lava cools quickly and traps gas bubbles within the rock. The resulting material is lightweight, porous, and highly absorbent, making it an ideal choice for a range of applications, from construction to skincare. Using Pumice Powder can reduce our reliance on non-renewable resources and create a more sustainable, circular economy.

Add Pumice Powder To Your Quote

Select Size

  • Granulations 4.75mm -45mm
  • Micro-Fine 10" (d90 of 10µm)
  • Micro-Fine 5" (d90 of 5µm)

Units

  • Pieces
  • Grams
  • Troy Ounces
  • Pounds
  • Kilograms
  • Metric Tons
  • Net Tons
  • Feet
  • Meters
  • Inches
  • Centimeters
  • Millimeters
Not seeing what you're looking for? Request Product

Related Products

View Open Cell Metal Foam
Open Cell Metal Foam
Open cell metal foam, also known as reticulated foam, features 100% open cells with a homogenous structure. The open cells provide a path through the foam in any direction, allowing gas and liquids to pass at control flow rates and buffer pressure. Open foams have high surface area-to-volume ratios which offer large heat transfer rates. They are lightweight, with high compressive strength, stiffness, energy absorption, and low specific weight. Specific properties and applications vary based on foam material. The most popular open-cell metal foam products are Aluminum and RVC foam.
View Aluminum Metal Foam
Aluminum Metal Foam
Aluminum metal foam is a fully customizable rigid, opened pore three-dimensional network of interconnected solid aluminum ligaments. The aluminum foam has a high strength-to-weight ratio, strong compression strength, and a high surface area per unit volume.
View Hemp Fiber
Hemp Fiber
Hemp Fiber (Bast Fiber) is a high-yield commercial fiber crop that grows from seed. Hemp stalks are harvested for their fibers and grow on the outside of the plant’s stalk, similar to the bark of a tree. Hemp fibers are advantageous as they are flexible, have low density and abrasiveness, and have mechanical properties comparable to glass fiber. There is also quantitative and qualitative homogeneity from one harvest to the next. Degummed Hemp Fiber is processed to remove lignin and pectin, so separated fibers are finer, softer, and more absorbent. Size ranges from ½ inch to 5 inches. Hemp Hurd is derived from the core of the hemp stalks and is also referred to as hemp shives. It looks similar to wood chips. It is porous and absorbent and naturally resistant to mold and bacteria. Raw Long Hemp Fiber is right from the stalk, non-processed, and uncombed with slight separation of fibers. Fibers range from 24 to 72 inches. Combed Hemp Fiber, also known as plumber's hemp, is untwisted and combed. Fiber length ranges from 4-5 inches long.
View Zirconium Carbide (ZrC)
Zirconium Carbide (ZrC)

Zirconium carbide (ZrC) is an extremely hard refractory ceramic material that is a gray metallic powder with a cubic crystal structure. It has good high-temperature mechanical properties, excellent electrical and thermal conductivity, a high melting point, and strong chemical resistance. Under irradiation, it demonstrates low neutron absorption cross-section and weak damage sensitivity. Various standard granulations are available below 106 microns. Purities: 99.0% & 99.5%

View Silicon Carbide (SiC)
Silicon Carbide (SiC)

Silicon carbide (SiC) is a hard, covalently bonded light grey solid that is nearly as hard as diamond. It is a refractory material (high melting point) with excellent thermal conductivity and low thermal expansion. It displays good thermal shock resistance, corrosion resistance, and stiffness. Silicon carbide is a semiconductor.

View Electrolytic Iron
Electrolytic Iron
Electrolytic iron is the purest form of iron, whereby commercial iron has all impurities removed through electrolysis. This electrochemical refining process helps to ensure uniform chemical composition and tight particle size distributions. Cathode deposit is supplied as small, smooth, irregularly shaped iron pieces. Chip from bright annealed and polished high-purity electrolytic iron chips, nominally 3/32” x 3/32” (2.5 x 2.5 mm) approximately 1/64” (400 μm) thick. The chips grade is known for its extremely low sulfur and carbon content and smooth polished uniform chips, which are easy to measure and disperse. Powder grade is available as annealed, unannealed in three different mesh sizes, or kosher certified. Purity 97%+
View Carbon (C)
Carbon (C)
Carbon is a pure non-metallic element found only in the forms of diamonds and graphite. Graphite is widely used for many applications because of its unique combination of properties. It is slippery to the touch, a good conductor of electricity and heat, is chemically inert, and can withstand high temperatures and corrosive environments. 99% to 99.99% (metals basis)
View Amorphous Carbons (C)
Amorphous Carbons (C)
Amorphous carbons include Carbon Black, Furnace Black, and Channel Black. They are black pigments produced by the thermal decomposition of natural hydrocarbons. These are free and reactive carbons with no crystalline structure. Reade offers furnace black. Nominal purity= 98.5 to 99.6% Available in bead, ground, and powder form with particle sizes ranging from 16 to 280 nanometers.
View Argan Shell
Argan Shell
Argan shells are the shells of the seed inside the argan fruit. It is an odorless natural organic material, and the powder qualifies as vegan and halal. The trees, Argania spinosa, bearing the fruit, are found almost exclusively in Southern Morocco, and the fruit is considered a precious raw material due to its limited yearly yield. Physical state: Solid (powder or granules) Color: reddish/brown Odor: Slight to neutral pH: Neutral Flashpoint: > 100ºC Solubility in water: Limited solubility, water-repellent surface Incompatibility with other products: None Hazardous decomposition or by-products: Will not occur

Thank you for adding a product to your quote request!

Submit a RFQ

Review & Submit

View other Products

View Products