Skip to main content
Home - Reade
Contact
Home - Reade
Build RFQ
clear
Back to Sustainable Products
 
Back to Sustainable Products
All Products Inorganic Standards Sustainable Products

Test Sand & Test Dust

How hydraulic, automotive, and aerospace application components perform when exposed to particles of sand and dust is essential during use as well as lifetime durability and performance. Sand and dust test standards address environmental conditions that materials and products may face during operation so contamination by solid particles can be controlled. These standard reference materials have been designed to improve precision and accuracy in particle counting.
Typical Applications

Test Dust is used for the minor particle procedure to ascertain the ability of equipment to resist the effects of fine particles and their penetration into cracks, crevices, bearings, and joints.

Test Sand is used to determine whether equipment can be stored and operated under blowing sand conditions without experiencing degradation of its performance, effectiveness, reliability, and maintainability due to the abrasion or clogging effect of large, sharp-edged particles

Packaging Options

Jars (typically 1 – 5 kg) or Pails

Classification

Varies

Bespoke Powders

Reade offers a comprehensive Test Dust range including ISO 12103, MIL-STD, DEF STAN, JIS Z, SAE J, ARAMCO, and many other standard products, but we also recognize that some projects require custom solutions. That’s where our bespoke test dust products and contaminants come in, offering high-quality, controlled, and specified dusts/challenge materials that remain consistent and readily available for future purchases. This fundamental aspect of any repeat testing ensures the value and reliability of your test data. Whether you need a specific particle size distribution, unique material composition, or other specialized characteristics, our team of experts are ready to assist you. Sharing any additional details or specific requirements you may have will help us to deliver tailored solutions that meet your requirements and expectations.
Add Bespoke Powder to your Request for Quote and enter your specifications in the additional note section.

Sustainable Qualities

Test Dust and Test Sand are considered sustainable materials because they can be reused and recycled in various applications. These materials are produced from natural minerals and undergo rigorous testing to ensure their consistency and quality. Test dust and test sand can be used for product testing, calibration, and research purposes, reducing the need for new materials and minimizing waste generation.

In a circular economy, the goal is to keep resources in use for as long as possible and minimize waste generation. Test Dust and Test Sand contribute towards this goal by being a sustainable material that can be used and reused in various applications, including product testing and calibration. By using these materials, manufacturers and researchers can reduce their reliance on new resources, leading to a more sustainable and circular economy.

Add Test Sand & Test Dust To Your Quote

Specifications Available

  • Test Sand & Test Dust - Fine Test Dusts
  • Test Sand & Test Dust - Fuel Contaminants
  • Test Sand & Test Dust - Other/Misc
  • Test Sand & Test Dust - Test Sands

Select Option

  • JIS Z 8901 Class 9
  • JLR Vehicle Test Dust (STJLR.00.5224)
  • MIL-E-5007D Endurance Dust (4.6.2.2.6)
  • MIL-STD-810 F/G Settling Dust (Sub 105micron)
  • MIL-STD-810D/E Dust (RTCA/DO-160D Dust)
  • MIL-STD-810F/G/H Dust (RTCA/DO-160E/F/G Dust)
  • MIL-STD-810F/G/H Red China Clay
  • MIL-STD-810F/G/H Talc
  • R10
  • R10 Fluroescent
  • R20
  • R5
  • SAE J 726 Coarse - Quartz Simulant
  • SAE J 726 Fine - Quartz Simulant
  • SAE J 997 3.2.1 Coarse Carbon
  • SAE J 997 3.2.2 Fine Carbon
  • TOP 3-2-045:2007 para 4.5.4 b. (1) Coarse
  • TOP 3-2-045:2007 para 4.5.4 b. (1) Fine
  • BS EN 60335-2-69:2009 Limestone Test Dust
  • 0-75micron Quartz Test Dust
  • 220 Turkish Grit
  • ARAMCO 32-SAMSS-008 (blended with salt)
  • ARAMCO 32-SAMSS-008 (blended without salt)
  • ARAMCO 32-SAMSS-008 (salt only)
  • Arizona Simulant - Nominal 90% <3micron
  • Arizona Simulant - Nominal 90% <5micron
  • Artificial Dirt to Volvo STD 1027,1375 2.2.3 - With NaCl
  • Artificial Dirt to Volvo STD 1027,1375 2.2.3 - Without NaCl
  • ASHRAE 52.2 Loading Dust
  • BS 1701 Coarse (DEF STAN 00-35 Pt3 Iss4 5.2.1C DUST)ECE R16 7.6.3.2 Dust
  • BS 1701 Fine
  • BS EN 60068-2-68:1996 <75μm Quartz Test Dust
  • BS EN 60312:2017 7.2.2.1 Mineral dust - Type 1
  • BS EN 60312:2017 7.2.2.3
  • Simulated Household Dust
  • BS EN 60312:2017 7.2.2.4 Mineral dust - Type 3
  • BS EN 60529 (Talc)
  • DEF STAN 0755 B Mix 50/50 Test Dust
  • DIN40050 - 9 cement flyash mix
  • DRB EN 149:2001 Dolomite
  • ECE Reg 1 Annex 7 (0-212 Sand)
  • FluoroTalc
  • ISO 12103-1:1997 A1 Ultrafine
  • ISO 12103-1:1997 A2 Fine
  • ISO 12103-1:1997 A3 Medium
  • ISO 12103-1:1997 A4 Coarse
  • ISO 12103-1:2016 A1 Ultrafine - Arizona Simulant
  • ISO 12103-1:2016 A2 Fine - Arizona Simulant
  • ISO 12103-1:2016 A2 Fine - CaCO3
  • ISO 12103-1:2016 A3 Medium - Arizona Simulant
  • ISO 12103-1:2016 A4 Coarse - Arizona Simulant
  • ISO 12103-2 M1
  • ISO 12103-2 M2
  • ISO 12103-2 M3
  • ISO 12103-2 M4
  • ISO 12103-2 M5
  • JIS Z 8901 Class 1
  • JIS Z 8901 Class 10
  • JIS Z 8901 Class 11 - loam simulant
  • JIS Z 8901 Class 12
  • JIS Z 8901 Class 15
  • JIS Z 8901 Class 2
  • JIS Z 8901 Class 3
  • JIS Z 8901 Class 4
  • JIS Z 8901 Class 5
  • JIS Z 8901 Class 6
  • JIS Z 8901 Class 7 Loam Based Simulant
  • JIS Z 8901 Class 7 Quartz Based Simulant
  • JIS Z 8901 Class 8 Loam Based Simulant
  • JIS Z 8901 Class 8 Quartz Based Simulant

Select Option

  • AMC to CS-670 (no Carbon Fibre)
  • AMC to CS-670 (with Carbon Fibre)
  • BS EN 14236 - 4 x 250 g packs
  • BS EN 14236 - 4 x 50 g packs
  • BS EN 17526:2021 5.7.2 Gas Stream Contaminant - 4*250g packs
  • BS EN 17526:2021 5.7.2 Gas Stream Contaminant - 4*50g packs
  • Chopped Carbon Fibre (nominal dia 5um)
  • ISO 4020 CB5 Fuel Contaminant.
  • Mil F 8615 Table V Fuel Contaminant
  • MIL-E-005007E Table X (Fuel Contaminant)
  • MIL-E-5007 Rev C Table I (Fuel Contaminant)
  • MIL-E-5007D Table X (Fuel Contaminant)
  • SAE AIR 4246 Rev A/B Table C1 (with carbon fibres)
  • SAE AIR 4246 Rev A/B/C/D Table C2 (no carbon fibres)
  • SAE AIR 4246 Rev C/D Table C1 (with carbon fibres & GEC)
  • SAE AIR 4246 Rev D Appendix A.10 (Explosion Suppressant Foam)
  • SAE AIR 4246 Rev D Appendix A.3 (Cotton Linters)/Cotton Linter Staple below 7
  • SAE AIR 4246 Rev D Appendix A.4 - Crushed Quartz Fraction 1000-1500micron (>96%)
  • SAE AIR 4246 Rev D Appendix A.4 - Crushed Quartz Fraction 150-300micron (>96%)
  • SAE AIR 4246 Rev D Appendix A.4 - Crushed Quartz Fraction 300-420micron (>96%)
  • SAE AIR 4246 Rev D Appendix A.4 - Crushed Quartz Fraction 420-1000micron (>96%)
  • SAE AIR 4246 Rev D Appendix A.5 - Crushed Quartz - MIL E 5007 D Sand 3.2.5.6.4
  • SAE AIR 4246 Rev D Appendix A.6 - Iron Chips 0-150micron
  • SAE AIR 4246 Rev D Appendix A.6 - Iron Chips 150-500micron
  • SAE AIR 4246 Rev D Appendix A.7 - Aluminium Chips 0-150micron
  • SAE AIR 4246 Rev D Appendix A.7 - Aluminium Chips 150-500micron
  • SAE AIR 4246 Rev D Appendix A.8 (Carbon Fibre Rods)
  • SAE AIR 4246 Rev D Appendix A.9 (Graphite Epoxy Composite)
  • SAE AIR 4246 Rev D Appendix A2 - Black Iron Oxide (Fe3O4) - 0 – 5 microns
  • SAE AIR 4246 Rev D Appendix A2 - Red Iron Oxide (Fe2O3) - 0 – 5 microns
  • SAE ARP8615 Table 5 Contaminant
  • 0-150micron iron chips
  • 150-500micron iron chips
  • 106-212micron iron chips
  • 212-300micron iron chips

Select Option

  • ASTM C150 Portland Cement
  • CCR10 Test Dust (0.36-40 microns)
  • CCR2.5 - Calcium Carbonate Test Dust
  • CCR5 - Calcium Carbonate Test Dust
  • Cellulose Powder (organic simulant)
  • EIA TP91A Test Dust/EIA -364-91A - Annex A.1 Benign Dust
  • EU 1008/2010 Appendix 4 (supplied at 5 x 200 ml)
  • FL15 (fine Flyash 0-15um)
  • PTL Soot Simulant
  • Scratch Accelerator Test Solution
  • UNECE UN045 Rev 2 (Annex 4: 2.1.1 Glass headlight)
  • UNECE UN045 Rev 2 (Annex 4: 2.1.2 Plastic headlight)
  • Grinding Workshop Dust Simulant
  • 0-100micron Iron Test Dust
  • 0-100micron Aluminium Test Dust
  • 0-63 um Clay - As Kaolin
  • 63-105um Aluminium oxide
  • Salt (NaCl) Nominal 0-100 um
  • Bespoke Powder

Select Option

  • ASTM F735 6/14 Sand
  • DEF STAN 07-55 SAND
  • EN 13181 7 a) Fine
  • EN 13181 7 b) Coarse
  • EN 13181 Standard Sand
  • MIL-E-5007 4.6.2.2.6 Endurance
  • MIL-E-5007D 3.2.5.6.4 Sand (Ingestion test)
  • MIL-E-8593A 4.6.2.2.6 Endurance
  • MIL-E-8593A Sand (Ingestion test)
  • MIL-STD-810D/E Sand (RTCA/DO-160E/F Sand, DEF STAN 00-35 Pt3 Iss4 5.2.2 Sand)
  • MIL-STD-810F/G/H Sand (RTCA/DO-160G Sand)
  • Mil-E-5007 C/D/E Ingestion sand <212micron

Units

  • Pieces
  • Grams
  • Troy Ounces
  • Pounds
  • Kilograms
  • Metric Tons
  • Net Tons
  • Feet
  • Meters
  • Inches
  • Centimeters
  • Millimeters
Not seeing what you're looking for? Request Product

Related Products

View Additive Manufacturing Powders
Additive Manufacturing Powders

Reade is proud to offer cutting-edge powders designed for many additive manufacturing applications. Our additive powders are meticulously crafted using state-of-the-art atomization technology. These metal additive powders have undergone rigorous testing and have proven their grit in various additive processes. Whether it's powder bed fusion, direct energy deposition, or binder jet technology, our powders consistently deliver exceptional performance, making them a reliable choice for diverse applications. Embracing metal additive manufacturing processes, often called metal 3D printing, marks a paradigm shift in design freedom, cost-effective manufacturing, and supply chain optimization. These proven processes are revolutionizing industries such as aerospace, oil and gas, automotive, energy, and medical sectors, allowing for the swift and efficient development and deployment of high-performance parts.

View Magnesium (Mg) Metal
Magnesium (Mg) Metal

Magnesium (Mg) is a light, moderately hard, silvery-white metal that ignites easily in the air and burns with a bright light. It is strong, has good heat dissipation and dampening, and is easy to weld, forge, cast or machine. It can improve the mechanical, fabrication, and welding characteristics when used as an alloying agent since it has a low density and is the lightest structural metal (a third lighter than aluminum). It also has good electrical properties. Magnesium turnings and chips are produced by milling commercial and high-purity magnesium, keeping size under control to obtain the desired specific surface and reactivity. They are silver-white. initially, but can turn to a dark gray if stored improperly. Purity: Standard purity (99.8% Mg) Ultra-high purity (99.98% Mg)

View Metal Solder
Metal Solder
Solder is a versatile metal alloy used for joining or repairing metal components in various industries, including electronics, plumbing, and jewelry making. Made from a combination of metals such as lead, tin, and copper, solder has a low melting point, making it easy to use in various applications. Solder comes in various forms, each with unique properties, making it ideal for specific applications. Regardless of the form, solder is easy to work with and provides a durable bond. Solder also has good electrical conductivity, making it an ideal choice for electrical applications.
View Zinc Formaldehyde Sulfoxylate
Zinc Formaldehyde Sulfoxylate
Zinc formaldehyde sulfoxylate (ZnC₂H₄O₆S₂), also known as zinc formaldehyde sulfoxylate monohydrate, is a white crystalline powder that is a strong reducing agent that can effectively reduce a wide range of organic and inorganic compounds. Zinc formaldehyde sulfoxylate is considered a safe and effective reducing agent for industrial use. However, it can be potentially hazardous if not handled or stored properly.
View Sodium Lignosulfonate
Sodium Lignosulfonate
Sodium lignosulfonate is a natural, biodegradable material, brownish-yellow powder or liquid. It is produced from the sulfite pulping process of wood. Sodium lignosulfonate is a versatile and widely used material in various industrial applications due to its dispersant, binding, and emulsifying properties. Its natural and biodegradable nature makes it an attractive alternative to synthetic chemicals. In contrast, its ability to improve the performance and quality of products makes it a valuable additive in many industries.
View Zirconium (III) Nitride (ZrN)
Zirconium (III) Nitride (ZrN)

Zirconium (III) nitride (ZrN) is a golden-yellow colored ceramic with high hardness, wear resistance, and corrosion resistance. The coating can be applied to various materials, including metals, ceramics, and plastics, to enhance durability and reduce surface wear and tear. Typical Purity 99.5%

View Tungsten (IV) Sulfide (WSâ‚‚)
Tungsten (IV) Sulfide (WSâ‚‚)
Tungsten (IV) Sulfide, WSâ‚‚, or Tungsten Disulfide, is a grayish-black powder that has a low friction coefficient and high load-bearing capacity making it popular as a solid lubricant. It also offers durability, wear resistance, and excellent electrical conductivity and thermal stability. It can also be added to composites to enhance strength and stiffness.
View Titanium Nitride (TiN)
Titanium Nitride (TiN)
Titanium nitride (TiN) is a hard, wear-resistant ceramic coating material with a gold color and a crystalline structure. Titanium nitride has high hardness, corrosion resistance, and wear resistance.
View Potassium Nitrate (KNO₃)
Potassium Nitrate (KNO₃)
Potassium nitrate, KNO₃, also known as saltpeter, is a white crystalline substance that is a strong oxidizer. Reade offers 4 grades of Potassium Nitrate powder.

Thank you for adding a product to your quote request!

Submit a RFQ

Review & Submit

View other Products

View Products