Skip to main content
Home - Reade
Contact
Home - Reade
Build RFQ
clear
Back to All Products
 
Back to All Products
All Products Sustainable Products

Quartz (SiO₂)

Quartz is the second most abundant of all minerals, is hard, crystalline, and composed of SiO₂. It is a free-flowing granular solid. It is hard, wear-resisting, and stable. As a filtration media, it can effectively remove suspended solids, organic matter, and colloidal particles. Quartz crystals can exhibit a piezoelectric effect and produce an electric voltage along certain directions of the crystal under pressure.

Purities are available between 99% and 99.99%
Special Notice: Our highest purity quartz powder (“Super Pure Quartz”) has the following typical chemistry (stated in ppm): Na= 0.83, K= 0.74, Li= 0.131, Ca= 0.45, Mg= <0.004, Fe= 0.16, Cu= 0.016, Mn= 0.005, Ni= 0.380, Cr= 0.028, Co= <0.024, Al= 4.07, Ti= <0.05, B= 0.02, and P= 0.02
Detailed Particle Sizing Information

Sand
45mm-.55mm
0.80mm-1.20mm

Gravel
2 1/2 x 1 1/2
1/2 x ½
1 1/2 x 1
3/8 x 3/16
1 1/2 x 1/2
1/2 x 1/2
1 x 1/2
1/4 x 1/8
1 x 5/8
3/16 x #10 Mesh
1 x 1/2
1/8 x #16 Mesh

Powder
8 x 20 Mesh
12 x 30 Mesh
30 x 50 Mesh
100 Mesh and finer
200 Mesh and finer
325 Mesh and finer

Typical Applications

Quartz is used in the manufacture of glass & labware, ceramics, silica brick, cement, and mortar. It also has important applications in the electronics industry due to its piezoelectric effect. Quartz Sand is used as a filtration media.
Ground quartz is abrasive in stonecutting, sandblasting, and glass grinding. Powdered quartz is used in making porcelain, scouring soaps, sandpaper, and wood fillers. Recent uses are with solar panels.

Packaging Options

50 lb. and 100 lbs. net in multi-ply paper bags; 3,000 lbs. net per super sacks; or loose bulk.

Classification

Quartz Powder TSCA (SARA Title III) Status: Listed. For further information, please call the EPA Office of Chemical Safety and Pollution Prevention (OCSPP) At 202-564-2902
Quartz Powder Amorphous Silicon CAS Number: 631-86-9
Quartz Sand CAS Number: 14808-60-7
Silicon Dioxide Powder CAS Number: 7631-86-9

Sustainable Qualities

Quartz is considered sustainable because it is a naturally occurring mineral with a low environmental impact compared to synthetic materials. It is abundant and widely available, reducing the need for resource-intensive extraction processes. Additionally, Quartz is highly durable and resistant to wear and tear, making it a long-lasting material that requires minimal maintenance and replacement. Its natural beauty and versatility make it a popular material for sustainable design and construction projects. As a naturally occurring, long-lasting, and versatile material, Quartz can contribute to a circular economy by promoting sustainable resource use and reducing waste.

Add Quartz (SiO₂) To Your Quote

Select Specifications Available

  • Gravel
  • Powder
  • Sand
  • Size Not Listed (Custom Spec)

Units

  • Pieces
  • Grams
  • Troy Ounces
  • Pounds
  • Kilograms
  • Metric Tons
  • Net Tons
  • Feet
  • Meters
  • Inches
  • Centimeters
  • Millimeters
Not seeing what you're looking for? Request Product

Related Products

View Open Cell Metal Foam
Open Cell Metal Foam
Open cell metal foam, also known as reticulated foam, features 100% open cells with a homogenous structure. The open cells provide a path through the foam in any direction, allowing gas and liquids to pass at control flow rates and buffer pressure. Open foams have high surface area-to-volume ratios which offer large heat transfer rates. They are lightweight, with high compressive strength, stiffness, energy absorption, and low specific weight. Specific properties and applications vary based on foam material. The most popular open-cell metal foam products are Aluminum and RVC foam.
View Aluminum Metal Foam
Aluminum Metal Foam
Aluminum metal foam is a fully customizable rigid, opened pore three-dimensional network of interconnected solid aluminum ligaments. The aluminum foam has a high strength-to-weight ratio, strong compression strength, and a high surface area per unit volume.
View Hemp Fiber
Hemp Fiber
Hemp Fiber (Bast Fiber) is a high-yield commercial fiber crop that grows from seed. Hemp stalks are harvested for their fibers and grow on the outside of the plant’s stalk, similar to the bark of a tree. Hemp fibers are advantageous as they are flexible, have low density and abrasiveness, and have mechanical properties comparable to glass fiber. There is also quantitative and qualitative homogeneity from one harvest to the next. Degummed Hemp Fiber is processed to remove lignin and pectin, so separated fibers are finer, softer, and more absorbent. Size ranges from ½ inch to 5 inches. Hemp Hurd is derived from the core of the hemp stalks and is also referred to as hemp shives. It looks similar to wood chips. It is porous and absorbent and naturally resistant to mold and bacteria. Raw Long Hemp Fiber is right from the stalk, non-processed, and uncombed with slight separation of fibers. Fibers range from 24 to 72 inches. Combed Hemp Fiber, also known as plumber's hemp, is untwisted and combed. Fiber length ranges from 4-5 inches long.
View Zirconium Carbide (ZrC)
Zirconium Carbide (ZrC)

Zirconium carbide (ZrC) is an extremely hard refractory ceramic material that is a gray metallic powder with a cubic crystal structure. It has good high-temperature mechanical properties, excellent electrical and thermal conductivity, a high melting point, and strong chemical resistance. Under irradiation, it demonstrates low neutron absorption cross-section and weak damage sensitivity. Various standard granulations are available below 106 microns. Purities: 99.0% & 99.5%

View Silicon Carbide (SiC)
Silicon Carbide (SiC)

Silicon carbide (SiC) is a hard, covalently bonded light grey solid that is nearly as hard as diamond. It is a refractory material (high melting point) with excellent thermal conductivity and low thermal expansion. It displays good thermal shock resistance, corrosion resistance, and stiffness. Silicon carbide is a semiconductor.

View Electrolytic Iron
Electrolytic Iron
Electrolytic iron is the purest form of iron, whereby commercial iron has all impurities removed through electrolysis. This electrochemical refining process helps to ensure uniform chemical composition and tight particle size distributions. Cathode deposit is supplied as small, smooth, irregularly shaped iron pieces. Chip from bright annealed and polished high-purity electrolytic iron chips, nominally 3/32” x 3/32” (2.5 x 2.5 mm) approximately 1/64” (400 μm) thick. The chips grade is known for its extremely low sulfur and carbon content and smooth polished uniform chips, which are easy to measure and disperse. Powder grade is available as annealed, unannealed in three different mesh sizes, or kosher certified. Purity 97%+
View Carbon (C)
Carbon (C)
Carbon is a pure non-metallic element found only in the forms of diamonds and graphite. Graphite is widely used for many applications because of its unique combination of properties. It is slippery to the touch, a good conductor of electricity and heat, is chemically inert, and can withstand high temperatures and corrosive environments. 99% to 99.99% (metals basis)
View Amorphous Carbons (C)
Amorphous Carbons (C)
Amorphous carbons include Carbon Black, Furnace Black, and Channel Black. They are black pigments produced by the thermal decomposition of natural hydrocarbons. These are free and reactive carbons with no crystalline structure. Reade offers furnace black. Nominal purity= 98.5 to 99.6% Available in bead, ground, and powder form with particle sizes ranging from 16 to 280 nanometers.
View Argan Shell
Argan Shell
Argan shells are the shells of the seed inside the argan fruit. It is an odorless natural organic material, and the powder qualifies as vegan and halal. The trees, Argania spinosa, bearing the fruit, are found almost exclusively in Southern Morocco, and the fruit is considered a precious raw material due to its limited yearly yield. Physical state: Solid (powder or granules) Color: reddish/brown Odor: Slight to neutral pH: Neutral Flashpoint: > 100ºC Solubility in water: Limited solubility, water-repellent surface Incompatibility with other products: None Hazardous decomposition or by-products: Will not occur

Thank you for adding a product to your quote request!

Submit a RFQ

Review & Submit

View other Products

View Products