Skip to main content
Home - Reade
Contact
Home - Reade
RFQ
Back to All Products
 
Back to All Products
All Products Sustainable Products

BLACK BEAUTY® Abrasive

This coal slag quickly cuts through surfaces faster than other abrasives while being environmentally friendly and leaving minimal dust with low free silica attributes (contains less than .01% free silica). BLACK BEAUTY® Abrasive black boiler slag is a highly effective blasting medium with a lower cost, making it a more economical option. BLACK BEAUTY® abrasive raw materials are sourced from stringent sources that meet environmental standards, including the most stringent abrasive specifications in the market. The fine and extra fine grades of BLACK BEAUTY® abrasive are military QPL approved to specification MIL-A-22262B(SH).
Typical Chemical Analysis

Silicon Dioxide = 48.78%
Aluminum Oxide = 20.97%
Ferric Oxide = 19.08%
Calcium Oxide = 6.02%
Potassium Oxide = 1.67%
Titanium Dioxide = 0.94%
Magnesium Oxide = 0.90%
Sodium Oxide = 0.62%

Typical Physical Properties

Free Silica – less than 0.1%
Particle Shape – angular, sharp
Hardness – 6 to 7 on the Moh’s scale
Bulk Density – 75-100 lbs per cubic ft
Specific Gravity – 2.73
Moisture Content – less than 0.5%

Typical Applications

MEDIUM: Used for general purpose repair and maintenance blasting including removal of paint, rust, mill scale, and other coatings from surfaces. The minimum suggested nozzle size of 1/4″ and, under standard blasting conditions, will achieve a 3.0-4.8 Mil profile.

FINE: Utilized for new construction, light paint and rust removal, and special maintenance applications requiring reduced profiles. The minimum suggested nozzle size of 3/16” under standard blasting conditions will achieve a 2.0-3.8 Mil profile.

EXTRA FINE: Applicable for light blasting requiring a clean surface and minimum anchor profile, including brush-off or high-pressure water blast systems. The minimum suggested nozzle size of 1/8” under standard blasting conditions will achieve a 1.0-2.6 Mil profile.

ELITE: If your project requires a specialized or superior blasting abrasive, we can fine-tune your BLACK BEAUTY® blasting media to custom gradations.

MILITARY SPECIFICATION MIL-A-22262B(SH): Military specification, the non-metallic abrasive formulation used in the blast cleaning of metal surfaces and glass-reinforced plastic surfaces.

Packaging Options

50lb bags/60 bags per pallet
100 lb bags/30 bags per pallet
JUMBO bags/loaded up to 2 tons/4,000 lbs
Also available in bulk

Classification

BLACK BEAUTY® Abrasive TSCA (SARA Title III) Status: Listed. For further information, please call the E.P.A. Office of Chemical Safety and Pollution Prevention (OCSPP) at 202-564-2902

CAS Number: 7631-86-9= Silicon Dioxide (SiO₂)

BLACK BEAUTY® passes California Title 17 for low dusting (CARB) (select plants), SSPC AB-1, 40CFR 261.24a (TCLP) and is also military QPL approved at select plants: MIL-A-22262B(SH). Contact READE to obtain the QPL certification.

Sustainable Qualities

Black Beauty is a type of recycled coal slag abrasive material used in sandblasting and surface preparation applications. It is considered sustainable because it is made from recycled materials that would otherwise end up in landfills. By using Black Beauty, waste is diverted from landfills, and the energy and resources needed to mine and process new materials are conserved. Additionally, Black Beauty can be reused multiple times, reducing the need for new abrasive materials and further contributing to a circular economy.

In terms of its environmental impact, Black Beauty produces less dust and waste compared to other abrasive materials, reducing the potential for air and water pollution. This makes it a more eco-friendly option for surface preparation and blasting applications. Overall, using Black Beauty as an abrasive material helps promote sustainable practices in the industry by reducing waste, conserving resources, and minimizing environmental impact.

Add BLACK BEAUTY® Abrasive to your quote

Select Size

  • Elite
  • Extra Fine
  • Fine
  • Medium
  • Military Specification Mil-A-22262B(SH)

Units

  • Units
  • Pieces
  • Grams
  • Troy Ounces
  • Pounds
  • Kilograms
  • Metric Tons
  • Net Tons
  • Feet
  • Meters
  • Inches
  • Centimeters
  • Millimeters
Not seeing what you're looking for? Request Product

Related Products

View Open Cell Metal Foam
Open Cell Metal Foam
Open cell metal foam, also known as reticulated foam, features 100% open cells with a homogenous structure. The open cells provide a path through the foam in any direction, allowing gas and liquids to pass at control flow rates and buffer pressure. Open foams have high surface area-to-volume ratios which offer large heat transfer rates. They are lightweight, with high compressive strength, stiffness, energy absorption, and low specific weight. Specific properties and applications vary based on foam material. The most popular open-cell metal foam products are Aluminum and RVC foam.
View Aluminum Metal Foam
Aluminum Metal Foam
Aluminum metal foam is a fully customizable rigid, opened pore three-dimensional network of interconnected solid aluminum ligaments. The aluminum foam has a high strength-to-weight ratio, strong compression strength, and a high surface area per unit volume.
View Hemp Fiber
Hemp Fiber
Hemp Fiber (Bast Fiber) is a high-yield commercial fiber crop that grows from seed. Hemp stalks are harvested for their fibers and grow on the outside of the plant’s stalk, similar to the bark of a tree. Hemp fibers are advantageous as they are flexible, have low density and abrasiveness, and have mechanical properties comparable to glass fiber. There is also quantitative and qualitative homogeneity from one harvest to the next. Degummed Hemp Fiber is processed to remove lignin and pectin, so separated fibers are finer, softer, and more absorbent. Size ranges from ½ inch to 5 inches. Hemp Hurd is derived from the core of the hemp stalks and is also referred to as hemp shives. It looks similar to wood chips. It is porous and absorbent and naturally resistant to mold and bacteria. Raw Long Hemp Fiber is right from the stalk, non-processed, and uncombed with slight separation of fibers. Fibers range from 24 to 72 inches. Combed Hemp Fiber, also known as plumber's hemp, is untwisted and combed. Fiber length ranges from 4-5 inches long.
View Zirconium Carbide (ZrC)
Zirconium Carbide (ZrC)

Zirconium carbide (ZrC) is an extremely hard refractory ceramic material that is a gray metallic powder with a cubic crystal structure. It has good high-temperature mechanical properties, excellent electrical and thermal conductivity, a high melting point, and strong chemical resistance. Under irradiation, it demonstrates low neutron absorption cross-section and weak damage sensitivity. Various standard granulations are available below 106 microns. Purities: 99.0% & 99.5%

View Silicon Carbide (SiC)
Silicon Carbide (SiC)

Silicon carbide (SiC) is a hard, covalently bonded light grey solid that is nearly as hard as diamond. It is a refractory material (high melting point) with excellent thermal conductivity and low thermal expansion. It displays good thermal shock resistance, corrosion resistance, and stiffness. Silicon carbide is a semiconductor.

View Electrolytic Iron
Electrolytic Iron
Electrolytic iron is the purest form of iron, whereby commercial iron has all impurities removed through electrolysis. This electrochemical refining process helps to ensure uniform chemical composition and tight particle size distributions. Cathode deposit is supplied as small, smooth, irregularly shaped iron pieces. Chip from bright annealed and polished high-purity electrolytic iron chips, nominally 3/32” x 3/32” (2.5 x 2.5 mm) approximately 1/64” (400 μm) thick. The chips grade is known for its extremely low sulfur and carbon content and smooth polished uniform chips, which are easy to measure and disperse. Powder grade is available as annealed, unannealed in three different mesh sizes, or kosher certified. Purity 97%+
View Carbon (C)
Carbon (C)
Carbon is a pure non-metallic element found only in the forms of diamonds and graphite. Graphite is widely used for many applications because of its unique combination of properties. It is slippery to the touch, a good conductor of electricity and heat, is chemically inert, and can withstand high temperatures and corrosive environments. 99% to 99.99% (metals basis)
View Amorphous Carbons (C)
Amorphous Carbons (C)
Amorphous carbons include Carbon Black, Furnace Black, and Channel Black. They are black pigments produced by the thermal decomposition of natural hydrocarbons. These are free and reactive carbons with no crystalline structure. Reade offers furnace black. Nominal purity= 98.5 to 99.6% Available in bead, ground, and powder form with particle sizes ranging from 16 to 280 nanometers.
View Argan Shell
Argan Shell
Argan shells are the shells of the seed inside the argan fruit. It is an odorless natural organic material, and the powder qualifies as vegan and halal. The trees, Argania spinosa, bearing the fruit, are found almost exclusively in Southern Morocco, and the fruit is considered a precious raw material due to its limited yearly yield. Physical state: Solid (powder or granules) Color: reddish/brown Odor: Slight to neutral pH: Neutral Flashpoint: > 100ºC Solubility in water: Limited solubility, water-repellent surface Incompatibility with other products: None Hazardous decomposition or by-products: Will not occur

Thank you for adding a product to your quote request!

Submit a RFQ

Review & Submit

View other Products

View Products