Skip to main content
Home - Reade
Contact
Home - Reade
RFQ
Back to All Products
 
Back to All Products
All Products Filtration Media Organic Materials Sustainable Products

Anthracite Filtration Media

This anthracite is thoroughly selected from anthracite, which yields the highest percentage of carbon. It is then hydraulically classified to reduce mineral matter and ash to a minimum and finally screened and washed to ensure suitability for filtration purposes. Anthracite properties deflect water absorption, which facilitates nano-filtration. Its irregular shape allows a free water flow, with a higher flow and less pressure drop than sand alone.

It is perfect for use in water filtration systems. It is often used with sand as one of the most efficient ways to restore water for drinking or use.
Typical Physical And Chemical Analysis

Carbon Content – 96%(based on ash/moisture free analysis)
Fracture – Angular
Density – 52 Lbs/Ft³
Hardness (Moh’s Scale) – 3.0 – 3.5
Specific Gravity – 1.6 Avg.
Solubility in Alkaline Waters – None
Solubility in Acid Waters – None
Solubility in Hydrochloric Acid – < 0.2% Visibly free of clay, shale, and extraneous dirt.

Typical Applications

Anthracite is used in water treatment and filtration, solvent extraction, the production of redox glass, metal casting, and as a refractory material.

Packaging Options

1 CF Bags (52 Lbs)
Super sacks

Classification

Classification of Anthracite Filtration Media
GHS-US classification
Carc. 1A H350
STOT SE 3 H335
STOT RE 1 H372
GHS-US labeling: GHS08

Sustainable Qualities

Anthracite Filtration Media is considered sustainable because it is a natural, low-cost, and environmentally friendly solution for water treatment and filtration. Anthracite is a particularly hard type of coal with a high Carbon content, making it an effective filtration media for removing impurities and contaminants from water. Unlike synthetic filtration media, anthracite is a readily available natural resource, and it can be reused and recycled in a variety of applications, contributing to a circular economy. Additionally, Anthracite Filtration Media is an energy-efficient option for water treatment, as it requires minimal energy to operate and does not produce harmful byproducts or waste.

Add Anthracite Filtration Media To Your Quote

Select Specifications Available

  • .60 - .80 mm
  • 1-5/8" X 2-7/16"(41.28 X 62.00 mm)
  • 1/2 - .85 - .95 mm
  • 13/16" X 1-5/8"(20.64 X 41.28 mm)
  • 3/16" X 5/16"(4.76 X 7.95 mm)
  • 3/32" X 3/16" (2.38 X 4.76 mm)
  • 3/4 - 1.0 - 1.2 mm
  • 5/16" X 9/16" (7.94 X 14.29 mm)
  • 9/16" X 13/16" (14.29 X 20.64 mm)
  • Size Not Listed (Custom Spec)

Units

  • Units
  • Pieces
  • Grams
  • Troy Ounces
  • Pounds
  • Kilograms
  • Metric Tons
  • Net Tons
  • Feet
  • Meters
  • Inches
  • Centimeters
  • Millimeters
Not seeing what you're looking for? Request Product

Related Products

View Open Cell Metal Foam
Open Cell Metal Foam
Open cell metal foam, also known as reticulated foam, features 100% open cells with a homogenous structure. The open cells provide a path through the foam in any direction, allowing gas and liquids to pass at control flow rates and buffer pressure. Open foams have high surface area-to-volume ratios which offer large heat transfer rates. They are lightweight, with high compressive strength, stiffness, energy absorption, and low specific weight. Specific properties and applications vary based on foam material. The most popular open-cell metal foam products are Aluminum and RVC foam.
View Carbon Nanotubes
Carbon Nanotubes
Carbon nanotubes (CNT) are tubes made of carbon atoms with nanometer diameters. Reade supplies a variety of carbon nanotubes. While many specific properties of CNTs are type dependent, in general, carbon nanotubes have high electrical conductivity. They have good thermal conductivity along the tube axis that is comparable to diamonds while exhibiting elastic, flexible, stiff, tough, and strong fibers while maintaining the chemistry of carbon molecules and being free of molecular defects. This carbon chemistry allows strong Van der Waals attraction which leads to spontaneous self-assembly and roping of many nanotubes, which may be important in certain applications. Single-wall carbon nanotubes (SWNT) are an intermediary allotrope of carbon between fullerene cages and flat graphene. Double-wall carbon nanotubes (DWNT) are similar to SWNT but are more resistant to chemical attacks. Multi-wall carbon nanotubes consist of multiple rolled layers of graphene. Dry powder form and dispersions available.
View Aluminum Metal Foam
Aluminum Metal Foam
Aluminum metal foam is a fully customizable rigid, opened pore three-dimensional network of interconnected solid aluminum ligaments. The aluminum foam has a high strength-to-weight ratio, strong compression strength, and a high surface area per unit volume.
View Hemp Fiber
Hemp Fiber
Hemp Fiber (Bast Fiber) is a high-yield commercial fiber crop that grows from seed. Hemp stalks are harvested for their fibers and grow on the outside of the plant’s stalk, similar to the bark of a tree. Hemp fibers are advantageous as they are flexible, have low density and abrasiveness, and have mechanical properties comparable to glass fiber. There is also quantitative and qualitative homogeneity from one harvest to the next. Degummed Hemp Fiber is processed to remove lignin and pectin, so separated fibers are finer, softer, and more absorbent. Size ranges from ½ inch to 5 inches. Hemp Hurd is derived from the core of the hemp stalks and is also referred to as hemp shives. It looks similar to wood chips. It is porous and absorbent and naturally resistant to mold and bacteria. Raw Long Hemp Fiber is right from the stalk, non-processed, and uncombed with slight separation of fibers. Fibers range from 24 to 72 inches. Combed Hemp Fiber, also known as plumber's hemp, is untwisted and combed. Fiber length ranges from 4-5 inches long.
View Zirconium Carbide (ZrC)
Zirconium Carbide (ZrC)

Zirconium carbide (ZrC) is an extremely hard refractory ceramic material that is a gray metallic powder with a cubic crystal structure. It has good high-temperature mechanical properties, excellent electrical and thermal conductivity, a high melting point, and strong chemical resistance. Under irradiation, it demonstrates low neutron absorption cross-section and weak damage sensitivity. Various standard granulations are available below 106 microns. Purities: 99.0% & 99.5%

View Silicon Carbide (SiC)
Silicon Carbide (SiC)

Silicon carbide (SiC) is a hard, covalently bonded light grey solid that is nearly as hard as diamond. It is a refractory material (high melting point) with excellent thermal conductivity and low thermal expansion. It displays good thermal shock resistance, corrosion resistance, and stiffness. Silicon carbide is a semiconductor.

View Electrolytic Iron
Electrolytic Iron
Electrolytic iron is the purest form of iron, whereby commercial iron has all impurities removed through electrolysis. This electrochemical refining process helps to ensure uniform chemical composition and tight particle size distributions. Cathode deposit is supplied as small, smooth, irregularly shaped iron pieces. Chip from bright annealed and polished high-purity electrolytic iron chips, nominally 3/32” x 3/32” (2.5 x 2.5 mm) approximately 1/64” (400 μm) thick. The chips grade is known for its extremely low sulfur and carbon content and smooth polished uniform chips, which are easy to measure and disperse. Powder grade is available as annealed, unannealed in three different mesh sizes, or kosher certified. Purity 97%+
View Carbon (C)
Carbon (C)
Carbon is a pure non-metallic element found only in the forms of diamonds and graphite. Graphite is widely used for many applications because of its unique combination of properties. It is slippery to the touch, a good conductor of electricity and heat, is chemically inert, and can withstand high temperatures and corrosive environments. 99% to 99.99% (metals basis)
View Diamond Dust (C)
Diamond Dust (C)
Diamond Dust is composed of pure carbon. Diamond powder is a super-abrasive and is offered in two categories: synthetically grown and naturally grown. Naturally mined diamond purity is 99+%. Synthetic diamond purity is 99%.

Thank you for adding a product to your quote request!

Submit a RFQ

Review & Submit

View other Products

View Products