|
  
- Ceramic Injection Molding (CIM) Material Synonyms:
powder ceramic injection molding moulding, cim, ceramic powder, Al2O3, pure alumina, 98% alumina, Al2O3, aluminum oxide, Al2O3+stabilized ZrO2, zirconia toughened alumina, AlN, aluminum nitride, B4C, boron carbide, SiC, silicon carbide, Si3N4, silicon nitride, TiB2, titanium diboride, ZrO2, zirconia, zirconium dioxide, Al2O3+ZrO2, toughened alumina, Y2O3, yttrium oxide, yttria, ZrO2+Y2O3, stabilized zirconia, yttria stabilized zirconia, powder metallurgy, P/M, feedstock, binder,
- Typical Properties of CIM Sintered Materials:
| Material |
Composition |
Typical Properties |
| Grain Size (μm) |
Density (g/cm³) |
Electrical R (Ω-m) |
Rupture Strength (MPa) |
Hardness (HV300gf) |
| Pure Alumina |
AI2O3 |
<3 |
3.95 |
>10¹³ |
400 |
2000 |
| 98% Alumina |
AI2O3 |
<5 |
3.88 |
>10¹³ |
275 |
1900 |
| Zirconia |
ZrO2 |
<0.6 |
6.05 |
>10¹² |
700 |
1200 |
| Toughened Alumina |
AI2O3+ZrO2 |
<1 |
4.15 |
>10¹³ |
550 |
1850 |
| Stabilized Zirconia |
ZrO2+Y2O3 |
<0.8 |
5.55 |
>10¹³ |
900 |
1350 |
- This Page Was Last Updated:
4 October 2011
|
